Take a fresh look at your lifestyle.

Mark Roemer Oakland Simplifies How to Keep Your Sewing Machine in Tip-Top Shape


According to Mark Roemer Oakland, it’s easy to keep your sewing machine in good condition by cleaning it regularly and performing routine maintenance tasks. Most people cannot keep their sewing machine in tip-top condition because they don’t know how to perform the appropriate maintenance.

Tips & Tricks

Here are a few tips you can follow to keep your sewing machine in excellent condition:

  1. Change needles regularly – It’s crucial to change the needles of your sewing machine regularly if you use them every day. Even after a single project, the sewing needles can lose their sharpness and lead to skipped stitches, looped threads, fabric pulls, and even cause damage to the machine.

Typically, it’s recommended that you change the sewing needle on your sewing machine after every project or at least after every eight hours.

  1. Apply the correct lube and in the correct spots – Applying lube regularly to your sewing machines ensures that all the parts inside it run smoother and remain in good condition for a long time. However, you cannot just use any type of oil. You need to purchase sewing machine oil that is easily available in craft stores or online.

It’s also important to refer to the product manual to figure out the correct spots where you need to insert the sewing oil or lube. One or two drops of sewing oil are generally effective enough to keep your sewing machine well-oiled and in good condition for the long term. Be sure to remove any extra oil by using a piece of scrap fabric.

  1. Keep your sewing machine covered when not in use – One of the major reasons that can cause your sewing machine to go bad is dust. If you keep your machine covered all the time, it can accumulate lots of dust over time and the dust can settle into the moving parts which can combine with sewing oil and turn into gunk. Thus, it’s important to keep your machine protected from dust at all times. And the best way to do that is to keep the machine covered using a hard or soft case when not in use.

You mustn’t forget to cover the foot pedal of the machine since it can also be subjected to lots of dust over time. And always ensure that you plug the plug before performing any cleaning task.

  1. Remove lint using compressed air – Lint-build up on a sewing machine is unavoidable and it can damage the machine if left unchecked. However, you can take care of lint build-up by using compressed air to clean it after every session. Another way to minimize lint build-up is to use high-quality and new threads.


Mark Roemer Oakland believes that getting your sewing machine serviced at least once a year is a great way to ensure its longevity. A professional service person can disassemble the machine to inspect for damage or wear and tear, provide a more thorough cleaning, and change certain parts to make the machine as good as new if it’s causing problems.

Comments are closed.